Fasteners

Specializing in fasteners, Tools, and Equipment for the construction trades.

Fasteners

Bi-Metal Fasteners

Screw Sizes:‍ 10-16, 12-14, 12-24, 1/4-14, 1/4-20. Head Styles: Hex Washer, Phillips Truss Square Pancake Drill Points: Type 1, Type 2, Type 3, Type 5 Available with bonded neoprene washer 500-hour long length coating

Rivets

Blind Rivets: #43 and 44 SS/SS Blind Rivet D/HD

Wood Decking & Drywall

We stock a very wide variety of wood decking & drywall fasteners, and the pictures below show some of our more commonly requested wood decking & drywall fasteners. If you are looking for something you can't see here, have questions, or want to place an order please call us at (800) 232-5060 to talk to a sales representative.

Wood to Metal Fasteners

Assorted Wood to Metal Fasteners

Bonded Neoprene Sealing Washers

We stock a very wide variety of sealing washers. Pictured above shows some of our more commonly requested sealing washers. If you are looking for something you can't see here, have questions, or want to place an order please call us at (800) 232-5060 to talk to a sales representative.

Assorted Washers

We commonly carry 3' x 3' plate washers in 1/8' to 1/4' thick, with 7/16" ID for 3/8" diameter thread. 9/16" ID for 1/2" thread. Both galvanized and plain. We also carry flat and fender washers for all common thread sizes. In addition, we stock Dock Washers and Split Lock Washers.

Assorted Metal to Wood Fasteners

Assorted Metal to Wood Fasteners

Bolts

We stock a variety of Bolts in both Carbon ( Grade 2 & Grade 5) and Stainless Steel. HEX Head Cap Screws HEX Head Tap Bolts

Nuts

We stock a variety of Nuts in both Carbon ( Grade 2 & Grade 5) and Stainless Steel. Finish HEX Nuts HEX Coupling Nuts Serrated Flange Lock Nut Eye Nut Nylon Insert Lock Nut Jam Nut Spring Nut

Titen HD

Titen HD Masonry Anchors, available in common sizes. Special sizes available upon request with short lead times.

Wedge Anchors

Hex head wedge anchors, sizes from 1/4' to 5/8" in stock. Special sizes available upon request with short lead times.

Drive Spike

Concrete Drive Spike Anchor. Common sizes in stock.

Zamac Nailin

Nail-in Masonry Fastener in different diameters and lengths.

Phillips Flat Head Tapcons

3/16" and 1/4" Diameter Common Lengths: 1" to 6"

Hex Washer Head Tapcons

3/16" and 1/4" Diameter Common Lengths: 1" to 6"

Clipfast Fasteners

SAE 1022 Steel Headmark - FSI Pancake Head Self Drilling Flat Wafer Head Self Drilling

410 Stainless Steel Self Drilling Fasteners

Stitch/Lap Point #2 Point #2 Long Pilot Point #3 Point#4 Point #5 Point

Carbon Steel Self-Drilling Fasteners with Washers

Stitch/Lap Point #2 Point #2 Long Pilot Point #3 Point #4 Point#5 Point

410 Stainless Steel Hex Washer Head with Sealing Washers

410 Stainless Steel Stitch/Lap Point #2 Poin t#2 Long Pilot Poin t#3 Point #4 Point #5 Point

Carbon Steel Phillips Head Self-Drilling Fasteners

Stitch/Lap Point SAE 1022 Steel Headmark - FSI

Carbon Steel Self-Drilling Fasteners with Washers

Stitch/Lap Point #2 Point #2 Long Pilot Point #3 Point#4 Point#5 Point

Type 3 Pancake Head Screws

SAE 1022 Steel Headmark - FSI

Anit Vibration Fasteners

Fabloks® and Bulb-Tite Rivets

Self Drilling Screws

Carbon Steel Hex Washer Head Self-Drilling Fasteners

Self Tapping Screws

We stock a very wide variety of self-tapping screws, and the pictures below show some of our more commonly requested self-tapping screws. If you are looking for something you can't see here, have questions, or want to place an order please call us at (800) 232-5060 to talk to a sales representative.
Call us today at 1-800-232-5060

Insulated Wall Panel Fasteners

1/4-14 HWH Type 3

USED TO ATTACH INSULATED PANEL EITHER THROUGH CONCEALED JOINT OR THROUGH EXTERIOR OF PANEL. DRILLING CAPACITY 1/4" STEEL.

1/4 - 14 HWH Type 5

USED TO ATTACH INSULATED PANEL EITHER THROUGH CONCEALED JOINT OR THROUGH EXTERIOR OF PANEL. DRILLING CAPACITY 1/2" STEEL.

1/4-20 HWH Carbon Steel Type 5 XL Coated

USED TO ATTACH INSULATED PANEL EITHER THROUGH CONCEALED JOINT OR THROUGH EXTERIOR OF PANEL. DRILLING CAPACITY ¼” STEEL. 20 THREADS PER INCH.

1/4 - 14 Torx Wafer Head Polarfast Type 3

USED TO FASTEN THROUGH EXTERIOR OF PANEL WHERE A LOW PROFILE FASTENER IS NEEDED. DRILLING CAPACITY 1/4 STEEL.

1/4-14x Square Wafer HD Type 3 XL CTD

USED TO ATTACH INSULATED PANEL EITHER THROUGH CONCEALED JOINT OR THROUGH EXTERIOR OF PANEL. DRILLING CAPACITY ¼” STEEL.

Clipfast Type 5

USED TO ATTACH INSULATED PANEL EITHER THROUGH CONCEALED JOINT OR THROUGH EXTERIOR OF PANEL. DRILLING CAPACITY 1/2” STEEL.

BULBTITE RIVETS

BULBTITE RIVETS – COMMONLY USED TO ATTACH INSULATED METAL PANELS TO BUILDING STRUCTURE. INSTALLATION REQUIRES SPECIAL TOOL TO PROPERLY PULL AND DEPLOY THE RIVET. TOOL IS AVAILABLE AT FSI. PLEASE ASK YOUR SALES REPRESENTATIVE ABOUT IT. AVAILABLE IN MULTIPLE SIZES TO MEET YOUR APPLICATION REQUIREMENTS AND NEEDS. PLEASE CONTACT YOUR SALES REPRESENTATIVE TODAY TO HELP CHOOSE THE SIZE THAT’S RIGHT FOR YOUR PROJECT.

FABLOK FASTENER

FABLOK FASTENER – COMMONLY USED TO ATTACH AND SECURE INSULATED METAL PANELS TO STRUCTURE. WHEN INSTALLED, FABLOK DEPLOYS FOLDING “TINES” THAT GRIP AND HOLD THE TWO MATERIALS TOGETHER WITH A WIDER FOOTPRINT THAN A STANDARD FASTENER MIGHT PROVIDE IN LIGHT GAUGE OR WHERE ACCESS IS OBSTRUCTED OR REDUCED. AVAILABLE IN 300 SERIES STAINLESS STEEL AND CARBON STEEL. SIZES AVAILABLE ((10-4 (Grip Range .062”-.250”), (10-8 (Grip Range .250”-.500”), 10-12 (Grip Range .500”-.750”)).
Call us today at 1-800-232-5060

Metal Roofing Screws

#14-13 SQ. Pancake Head Type 1

Used to attach standing seam metal roof clips to wood and metal. Available in sizes 1-1/2” to 8”. Drilling capacity up to 16 gauge steel

¼-14 SQ. Pancake Head Type 3

Used to attach clips, panels or trim to medium gauge steel. Available in sizes 2” to 8”. Drilling capacity up to ¼” steel

¼-14 SQ. Pancake Head Type 5

Used to attach clips, panels or trim to heavy steel. Available in sizes 1-1/2” to 8”. Drilling capacity up to ¼ to 1/2” steel

¼-14 HWH Type 3

Used to attach metal roof panels or metal framing to medium steel. Available in sizes 3/4” to 12”. Drilling capacity up to ¼” steel

¼-14 HWH Type 5

Used to attach metal roof panels or metal framing to heavy steel. Available in sizes 1-1/2” to 10”. Drilling capacity up to ¼’ to ½” steel

¼-20 HWH Type 5

Used to attach metal roof panels or metal framing to heavy steel. Available in sizes 1-1/2” to 10”. Drilling capacity up to ¼’ to ½” steel
Call us today at 1-800-232-5060

We’re ready to assist you